![]() |
Distributed by High Performance Products York Sales Hotline: 01904 295 250 email: info@irextender.co.uk
Purchase
Blue Eye Products Now |
|
||
All Blue Eye IR receivers are optimised for Sky, Sky HD & are plasma screen friendly |
|||||
|
|
||||
|
|||||
|
Niche-Mode IR Extender Kit USB or Mains Powered
Please Note: |
NEWThe visible part of the sleek IR receiver is only 15mm x 25mm. See illustration below. 1.2m cable length Easy Fit IR Receiver The receiver head is attached to a hinged self-adhesive mounting plate and can be fixed straight or any angle up to 90 degrees. 3 x Flasher Buds
Easily attached using the self-adhesive pads.For ease of wiring each flasher bud has a staggered cable length, 1.0m, 1.5m, 2.0m |
||||
|
The "Stealth Kit" is a complete single room IR Extender Kit /Repeater solution. The IR extender kit comprise of a power pack, stealth receiver head and is available with 3 or 6 signal flasher LED heads. It can be used to control components hidden away in a cabinet or wall recess. Also available with 1 x 3.5mm jack plug replacing normal flasher head for some components with direct IR connection capability. Optimised for Sky & Sky hd - Plasma, LCD & LED Screen Friendly
Wire Lengths: IR receiver to flasher module:
0.8m / length to LED emitters 1.2m The Stealth IR Extender Kit cables cannot be extended or have components added. More information and Stealth Kit wiring diagram
|
||||
|
Blue Eye's tiny "Stealth" receiver can be hidden in the most convenient place. It can be used in single room applications using the Power Injector and an Active Flasher Module or Mini Blaster IR Flood (flasher) or can also be used in multi room applications where up to 5 Stealth Receivers can be joined to the Distribution Hub using CAT5/6 cable extensions. Optimised for Sky & Sky hd -
Plasma,
LCD & LED Screen Friendly. Wire Lengths: from IR receiver to PCB: 0.5m /
from PCB to RJ45 plug 2.0m
|
||||
Blue Eye Flashers
|
|||||
Active Flasher Module
|
The Active Flasher Module can be used in single room applications using the Power Injector and a Stealth Receiver. The Active Flasher Module can also be used in multi room applications where it can be joined to the Distribution Hub using CAT5/6 cable. Active IR Flasher Modules also available with 3
or 6 flashers for control of multiple components. |
||||
|
The "Mini Blaster" acts as a IR remote signal 'flood' and can operate a number of audio visual components. The IR Blaster is positioned set back from the components to give a wide IR flood. The flood signal can also be reflected off the back of say, a cupboard door. NOT Optimised for MySky, MySky hdi.
Comes in blister pack. |
||||
|
|||||
|
The Distribution Hub is used for multi-room IR signal distribution and can be linked with additional hubs to allow even more expansion. All receivers and flashers are connected to the central hub. The hub has 2 channels which gives two separate systems in one. This allows the control of, say, two identical Sky de-coders from different rooms. The Distribution Hub requires a 12V power
supply. Hub Power Supply (12V regulated) recommended. Comes as shown in
circuit board for with stick-on mounts. |
||||
|
Hub Power pack is used to supply power to the distribution hub.
12V Regulated. |
||||
|
The Power Injector is used to power small installations where the length of cable of the Stealth Kit is not sufficient. Separate Blue Eye receiver and flasher components would be used with the Power Injector. The distance between components and the Power Injector can be lengthened by using CAT5/6 cable extensions (see below). It comes with 2 RJ45 sockets.
Power Injector compatible components: |
||||
CAT5e Extension Cable
|
Hassle free way to extend receiver or flasher cables.
Use with Power Injector or Distribution Hub
systems, cannot be used with Stealth Kit. Extension Cable compatible components: |
||||
Warning: Do not attempt to use Blue Eye components with any other manufacturers equipment. |
|||||
|
Stealth Kit - 3
Stealth Kit -
6
SALES HOTLINE: 01904
295 250 |